Quantum DLT VS160 Bedienungsanleitung Seite 65
- Seite / 90
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Diagnostics and Troubleshooting
Troubleshooting
Quantum ATL ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual 51
should be terminated. Refer to the manuals supplied with the
other devices on the SCSI bus for termination on enabling or
disabling termination on those devices.
To terminate the ValueLoader, locate the terminator in the
accessories package and press it firmly into the either of the
two SCSI connectors on the rear panel of the ValueLoader.
Secure the terminator by tightening the finger-screws until
snug. The supplied terminator is “dual mode” and will work
on both Low-Voltage Differential (LVD) and Single Ended (SE)
SCSI buses. A green LED on the terminator indicates that the
unit is attached to a SCSI bus running in LVD mode. A red
LED on the terminator indicates that the unit is attached to a
SCSI bus running in SE mode. If the LED is not on, check all
SCSI and power connections and confirm that the unit is
attached to a valid SCSI bus.
•
Compatibility: Ensure that the ValueLoader is compatible with
the SCSI host adapter and backup application you plan to use.
For a list of compatible SCSI adapters and application software,
check with your SCSI host adapter manufacturer, backup
application vendor, or the Quantum support web site at
www.quantum.com.
•
SCSI Host Adapter Installation: Verify that you have installed
your SCSI host adapter correctly. Refer to the manual that
came with your SCSI host adapter for installation and
troubleshooting instructions. Pay particular attention to any
steps describing the settings of various jumpers and/or
switches on the host adapter, or on newer adapters, the setup
application for the adapter. Make sure that the host adapter is
properly seated in the motherboard slot and the operating
system correctly detects the host adapter. Make sure that the
proper device driver is installed for the SCSI host adapter.
•
Backup Application Installation: Refer to the documentation
included with your backup application for instructions on how
to verify proper installation. Most backup software packages
require an additional module to communicate with the
ValueLoader robotics.
- User Manual 1
- Contents 3
- Audience 11
- Document 12
- Organization 12
- Contact Information 14
- Installing the ValueLoader 15
- Installation Overview 1 16
- Barcode Reader 1 17
- Requirements 17
- Product Overview 1 18
- 1Power switch 18
- 2 Import/Export slot 18
- Figure 2 Rear Panel 19
- Overview 19
- Choosing a Location 1 20
- Unpacking the ValueLoader 1 21
- Accessories 1 22
- Figure 4 Rack Kit 23
- Components 23
- Settings > Control 29
- Panel > SCSI Adapter 29
- Media Changer) 29
- 15 Click the Finish button 33
- Operating the ValueLoader 35
- Operator’s Panel Overview 2 36
- Operator’s Panel Overview 37
- Figure 10 Operator’s 38
- Panel—Drive Loaded 38
- Table 2 LEDs 39
- Table 3 Control 40
- Figure 11 Operator’s 41
- Panel Menu Structure 41
- Using Cartridges 2 42
- Using Cartridges 43
- Figure 12 Importing a 43
- Cartridge 43
- Figure 13 Exporting a 44
- Maintaining 47
- Cartridges 47
- Cleaning the Tape Drive 2 48
- Cleaning the Tape Drive 49
- ValueLoader Administration 53
- Configuring the ValueLoader 54
- Updating Firmware 3 58
- Updating Firmware 59
- Diagnostics and 63
- Troubleshooting 63
- Troubleshooting 4 64
- Installing the Device Drivers 66
- on page 16). Also refer to 66
- for more information 66
- Removing Stuck Cartridges 4 72
- Cartridge carrier 74
- Cartridge lock lever 74
- Removing Stuck Cartridges 75
- Figure 17 Installing 75
- ValueLoader Error Codes 4 76
- ValueLoader Error Codes 77
- Table 5 Error Codes 77
- Technical Specifications 81
- Physical Specifications 83
- Table 9 Tape Drive 83
- Specifications 83
- Table 10 Media 84
- Customer Support 85
- Backup Software Support 2 86
Verwandte Produkte und Handbücher für Bandlaufwerke Quantum DLT VS160
Bandlaufwerke Quantum DLT 2500 Handbuch
(12 Seiten)
(12 Seiten)
Bandlaufwerke Quantum DLT 4000 Handbuch
(300 Seiten)
(300 Seiten)
Bandlaufwerke Quantum LTO-2 Spezifikationen
(1 Seiten)
(1 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.068 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern