Quantum DLT VS160 Bedienungsanleitung PDF herunterladen (Seite 75)

Diagnostics and Troubleshooting

Removing Stuck Cartridges

Quantum ATL ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual 61

9 After removing the cartridges from the desired carriers,

reinstall each carrier on the ValueLoader belt (figure 17

• Make sure that the rollers on the bottom of the carrier are

aligned in the carrier tracks.

• Make sure that the belt post beneath each carrier is inserted

into the proper ValueLoader belt loop.

Figure 17 Installing

the Carrier

10 Ensure the carrier is properly installed on the belt by gently

pressing on the top of the carrier and sliding it back and forth.

If it is properly attached to the belt, it should not move. If it

moves, reinstall the carrier.

11 Replace the top cover of the ValueLoader and reinstall the

cover screws and mounting brackets (if rackmounted).

Note: There are unused loops on the belt. The proper belt

loops have an extra bump on the outside of the loop.

See figure 17

below.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 89 90

Keine Kommentare

Quantum DLT VS160 Bedienungsanleitung Seite 75