Quantum DLT VS160 Bedienungsanleitung PDF herunterladen (Seite 77)

Diagnostics and Troubleshooting

ValueLoader Error Codes

Quantum ATL ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual 63

Table 5 Error Codes

Error Code Description Details

3081 Invalid Command Error. This error indicates that the ValueLoader

received an undefined command or an invalid

parameter with a command.

3082 Device Status Not Suitable To

Execute This Command.

If the robotics are busy, some commands

cannot be executed at the same time. This error

indicates a probable violation. This is not an

error condition, but it does result in busy being

reported to the host for the requested SCSI

command.

3083 Inventory Not Valid. The cartridge inventory is not valid because of

manual changes or previous fatal errors.

Update the inventory using the Re-inventory

option in the Configuration menu. See Creating

an Inventory of Cartridges on page 36 or power

cycle.

3084 Source Empty. There is no cartridge in the location from which

a cartridge move was issued.

3085 Destination Full. The location to which a cartridge move was

issued already contains a cartridge.

3086 Import/Export Slot Access

Rejected.

User attempted to access the Import/Export

slot, but media removal was prevented by the

host.

3087 Operation Timeout. A command did not complete in the required

amount of time.

3088 Communications Error

During Loop-back.

Cycle power on the ValueLoader and attempt

the operation again. If the error recurs, contact

Quantum Technical Support.

3089 System Test Timeout. There was a communication timeout between

the drive and loader during the System Test.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 89 90

Keine Kommentare

Quantum DLT VS160 Bedienungsanleitung Seite 77