Quantum DLT 8000 Handbuch PDF herunterladen (Seite 400)

100

101

Appendix G: DLT 7000 Emulation Feature

G-2 Quantum DLT 8000 Tape System

Enabling and Clearing the DLT 7000 Emulation Feature

CAUTION

Use Extreme Caution when enabling the DLT 7000 emulation feature: the DLT

7000 emulation mode changes the operation of the tape drive and fundamentally

changes the way data and media are handled.

• Do NOT enable/clear the DLT 7000 emulation feature with a tape cartridge

loaded in the tape drive.

• Do NOT enable/clear the DLT 7000 emulation feature while the drive is in

operation.

1. Enable and clear the DLT 7000 emulation mode via the SCSI bus by changing the

EMUL7K_MODE parameter (in EEPROM) on the Vendor Unique EEPROM

Parameter Page.

• When EMUL7K_MODE is set to 1, DLT 7000 emulation is enabled on the

drive.

• When EMUL7K_MODE set to 0, it restores the drive to standard DLT 8000

operation.

2. After the DLT 7000 Emulation Mode feature has been enabled, it is critical that

you reinitialize the SCSI bus interface using one of the following methods:

• Issue a bus reset (this resets all devices on the bus);

• Issue the Advanced SCSI Programming Interface (ASPI, an interface

specification for sending commands to SCSI host adapters) Device Reset

command SCSI_RESET_DEV (this resets the specific device changed); or

• Issue the ASPI command SRB COMMANDRESCANBUS, as described in the

Win 32 ASPI Specification.

1 2 ... 395 396 397 398 399 400 401 402 403 404 405 406 407 408

Kommentare zu diesen Handbüchern

Keine Kommentare

Quantum DLT 8000 Handbuch Seite 400

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Bandlaufwerke Quantum DLT 8000