Quantum DLT 8000 Handbuch PDF herunterladen (Seite 79)

100

101

Configuring, Installing, and Operating the Tape Drive

Quantum DLT 8000 Tape System 2-25

2.4.2 Tape Cartridge Write-Protect Switch

Figure 2-12 Write-Protect Switch on Tape Cartridge

Each tape cartridge has a write-protect switch that can be used to prevent accidental

erasure of data. Before inserting the tape cartridge into the tape system, position the

write-protect switch on the front of the cartridge:

• Move the write-protect switch to the left to enable write protection (existing data on

the tape cannot be overwritten, nor can additional data be appended to the media).

When the write-protect switch is moved to the left, a small orange rectangle is

visible. This indicates that data cannot be written to the tape.

• Move the write-protect switch to the right to disable write protection (existing data

on the tape can be overwritten, and/or additional data can be appended to the media

unless the cartridge is write-protected via software). When write-protect is disabled,

no orange rectangle is visible.

Write-Protect Switch pushed to the

right (Write Protect disabled position)

Tape Cartridge (Label End)

Write-Protect Switch pushed to the

left (Write Protect enabled position)

Orange Rectangle Visible

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 407 408

Kommentare zu diesen Handbüchern

Keine Kommentare

Quantum DLT 8000 Handbuch Seite 79

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Bandlaufwerke Quantum DLT 8000