
Appendix B Relocating the Library
Crating the Library
ATL P2000 Series Automated Tape Library User’s Guide 91
b
Remove the ramp sections from the pallet and slide them
into the center section.
c
Insert the foam block around the bottom of the library and
the pallet.
d
Insert and attach the stop blocks underneath the library on
the right side.
e
Attach the wooden bar on the right side of the library.
f
Remove the wooden bar on the left side of the library.
g
Repeat steps d and e for the left side of the library.
4
Place the accessory kits into the cutouts on the back crate panel.
5
Place the foam cap over the library.
6
Wrap the cardboard crate around the library and fasten it using
the plastic restraining clips.
7
Place the top onto the crate.
8
Secure the crate with two steel restraining bands.
Kommentare zu diesen Handbüchern