Quantum P2000 Betriebsanweisung PDF herunterladen (Seite 75)

Chapter 3 Operator Commands

Unloading the Load Port

ATL P2000 Series Automated Tape Library User’s Guide 55

Use the arrow buttons to highlight the desired drive and then

press Execute.

The GUI displays a Command In Progress dialog box.

The Unload Drive command continues until completed unless

you press the Abort button to stop the operation.

Unloading the Load Port

The Unload Imp/Exp command moves a tape cartridge from the

load port to an available storage bin or visa versa. This option must

be invoked after inserting a tape into the load port whenever the

library Auto Load feature is disabled (see Configuring Library

Options on page 49)

To unload the load port:

On the Operator screen, press the Unload Imp/Exp button.

The GUI displays a Command In Progress dialog box is

displayed.

If it becomes necessary to stop the Unload command, press the

Abort button

Note:

You can also use the Move Cartridge command to unload

the load port. The Move Cartridge command is

especially useful if the destination of the move is

important. For more information about the Move

Cartridge command, see Moving Cartridges

on page 52.”

Note:

The inventory process is also stopped if an error is

detected. In this case, the GUI displays an error

message.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 145 146

Keine Kommentare

Quantum P2000 Betriebsanweisung Seite 75