Quantum P2000 Betriebsanweisung PDF herunterladen (Seite 59)

Chapter 2 Basic Library Operations

Inserting Tape Cartridges into the Load Port

ATL P2000 Series Automated Tape Library User’s Guide 39

Loading a Tape

Cartridge

Magazine

The magazine used with DLT/SDLT tape cartridges have keyed

bins to prevent improper cartridge insertions. They are equipped

with spring-loaded mechanisms to capture or release a tape

cartridge.

To insert a tape cartridge, push it into the magazine’s bin until you

here a click and the metal tab at the left side of the bin pops out.

To remove a tape cartridge, gently push the cartridge all the way

into the bin, then release. The cartridge will be partially ejected,

making it easy to remove.

Inserting Tape Cartridges into the Load Port

This section explains how to insert tape cartridges using the load

port mechanism.

Inserting DLT/

SDLT Tape

Cartridges

DLT/SDLT tape cartridges are inserted into two removeable 6-

cartridge magazines as shown in figure 8

on page 16. Tape

cartridges may be loaded to or unloaded from a magazine with the

magazine in or out of the library.

To insert a DLT tape cartridge into a magazine:

Prepare the tape cartridges to be inserted by affixing a bar code

label and write-protecting or write-enabling each cartridge as

desired.

Caution:

Do not use CompacTape I, CompacTape II

CompacTape IIIXT cartridges in this library.

Note:

To move cartridges to the load port for removal, refer to

Moving Cartridges

on page 52.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 145 146

Keine Kommentare

Quantum P2000 Betriebsanweisung Seite 59