Quantum LTO 4 Betriebsanweisung PDF herunterladen (Seite 71)

Chapter 6 Troubleshooting Guide

Troubleshooting Suggestions

LTO-4 (Model B) Half-Height Tape Drive User’s Guide 55

2 Restart the system.

Computer Hardware

Does Not Recognize the

Ta p e D r i v e

If the computer starts normally but does not recognize the tape drive:

1 Restart the system and check whether the SCSI controller is

recognized at system startup. You should see messages similar to:

SCSI Adapter Manufacturer SCSI BOIS xxxxxxx

CHA: SCSI ID #, SCSI Device Name

SCSI ID #, SCSI Device Name”

2 If the SCSI controller is recognized during system startup, restart the

system to determine whether the tape drive is recognized when the

SCSI controller scans for devices. You should see messages similar

to:

Bus Target Lun Device

0 0 0 Quantum ULTRIUM 4

IF the system . . . THEN . . .

starts normally, there is a problem with the SCSI HBA.

1 Make sure that the SCSI HBA:

• Is compatible with system

• Does not have burnt components

Reinstall the SCSI HBA in a different

PCI slot and restart the computer.

still does not start, contact Technical Support.

IF the SCSI controller is . . .

during system startup, THEN . . .

recognized proceed to step 2 to determine

whether the tape drive is

recognized when the SCSI

controller scans for devices.

not recognized contact Technical Support.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 97 98

Keine Kommentare

Quantum LTO 4 Betriebsanweisung Seite 71